Last Updated for InterWorx-CP version 2.1.0

No Special Prerequisites.

This procedure will detail how to add an IP address or range of IP addresses to an InterWorx-CP server.

1. Click on the Server menu if it is not already expanded.
2. Click on the ♦    IP Management item.
3. You should now be looking at the IP Management controls in the main content area.
4. Locate the Add IP Adresses section.
5. Type the IP address in the IP Range Start field.
6. The IP Range End field will auto-populate with the same IP address.
7. Enter the netmask in the Netmask field.
8. Select the device you wish to add this IP address to from the Device drop-down list. eth0 is the primary NIC.
9. Select Shared or Dedicated in the Type field. If an IP address is shared, multiple SiteWorx accounts will be able to share that IP address.
10. If you wish to make this IP address available to resellers, select Yes in the Available to Resellers drop-down list.
11. Click the Add button.
12. You will see the following messages at the top of the screen:

» IP added successfully : ipaddress
» IP activated on the system : ipaddress
» DNS server mapped successfully

1. Click on the Server menu if it is not already expanded.
2. Click on the ♦    IP Management item.
3. You should now be looking at the IP Management controls in the main content area.
4. Locate the Add IP Adresses section.
5. Type the IP address in the IP Range Start field.
6. The IP Range End field will auto-populate with the same IP address. Change this to the end address of the IP block you wish to add.
7. Enter the netmask in the Netmask field.
8. Select the device you wish to add this IP address to from the Device drop-down list. eth0 is the primary NIC.
9. Select Shared or Dedicated in the Type field. If an IP address is shared, multiple SiteWorx accounts will be able to share that IP address.
10. If you wish to make these IP addresses available to resellers, select Yes in the Available to Resellers drop-down list.
11. Click the Add button.
12. You will see the following set of messages for each IP address at the top of the screen:

» IP added successfully : ipaddress
» IP activated on the system : ipaddress
» DNS server mapped successfully